Product Hardware Features - TRENDnet TEW-752DRU User Manual

TRENDnet User's Guide
Performance
N600 Wireless
Proven concurrent dual band 300 Mbps wireless n
Gigabit Ports
Gigabit ports extend high performance wired connections
Wireless Coverage
Extensive wireless coverage with MIMO antenna technology
Quality of Service (QoS)
Advanced QoS prioritizes video and audio transmissions
Compatibility
Compatible with older Wireless G devices
Energy Savings
Embedded GREENnet technology reduces power consumption by up to
50%
IPv6
IPv6 network support
*Maximum wireless signal rates are referenced from IEEE 802.11 theoretical
specifications. Actual data throughput and coverage will vary depending on
interference, network traffic, building materials and other conditions
© Copyright 2013 TRENDnet. All Rights Reserved.

Product Hardware Features

Rear View
Reset Button
Gigabit LAN Ports
1-4
Gigabit Internet
Port
• USB Port: Press and hold this button for 10 seconds to reset the router.
• Reset Button: Press and hold this button for 10 seconds to reset the router.
• WPS Button (Wi-Fi Protected Setup): Push and hold this button for 5 seconds to
activate WPS. The Power LED will blink when WPS is activated.
• Gigabit LAN Ports 1-4: Connect Ethernet cables (also called network cables) from
your router LAN ports to your wired network devices.
• Gigabit Internet Port: Connect an Ethernet cable from your router Internet port
to your modem.
• Power Port: Connect the included power adapter from your router power port
and to an available power outlet.
• On/Off Power Switch: Push the router On/Off power switch to turn your router
"On" (Inner position) or "Off" (Outer position).
TEW-752DRU
USB Port
WPS Button
Power Port
On/Off Power Switch
5