Write-Protecting Discs; Loading And Unloading Discs - Sony PDW-U1 Operation Manual

Professional disc drive unit
Hide thumbs Also See for PDW-U1:
Table of Contents

Advertisement

Available languages

Available languages

• Deliberately opening the shutter may
cause damage.
• Do not disassemble the cartridge.
• The supplied adhesive labels are
recommended for indexing discs. Apply
the label in the correct position.
Storage
• Do not store discs where they may be
subjected to direct sunlight, or in other
places where the temperature or humidity
is high.
• Do not leave cartridges where dust may
be able to gain ingress.
• Store cartridges in their cases.
Care of the discs
• Remove dust and dirt on the outside of a
cartridge using a soft dry cloth.
• If condensation forms, allow ample time
to dry before use.
3-4-3 Write-Protecting
Discs
To protect the content recorded on the disc
from accidental erasure, move the write-
protect tab on the lower surface of the disc
in the direction of the arrow, as shown in the
following figure.
Lower surface
of the disc
Slide in the direction
Write Inhibit
of the arrow
tab settings
SAVE
SAVE
Recording
Recording
disabled
enabled
3-4-4 Loading and
Unloading Discs
To load and unload a disc, press 1 (power)
button to turn the unit on and light the
indicator, and follow the procedures
indicated in the next illustration.
Write Inhibit tab
3-4 Handling Discs
43

Advertisement

Table of Contents
loading

Table of Contents