Menu Contents - Sony HVR-M35U Operating Instructions Manual

Digital hd videocassette recorder
Hide thumbs Also See for HVR-M35U:
Table of Contents

Advertisement

Operating Menus

Menu Contents

Initial settings are indicated with rectangles.
IN/OUT REC menu
Icon/Menu
Submenu
IN/OUT
HDV/DV SEL
REC
(pages 38, 48,
59, 67)
REC
MODE
(pages 50, 69)
72
Chapter 5 Adjusting and Setting Through Menus
Setting
Normally, set this menu to [AUTO]. Select this menu when you want to limit the output format
during tape playback or limit the signals to be input or output from the
This setting will affect analog outputs.
BAUTO :
Automatically switches signals to HDV format or DVCAM/DV format during
tape playback.
When an i.LINK cable is connected, signals in HDV format or DVCAM/DV
format will be switched automatically and signals from the
will be input /output for recording/playback.
HDV :
Outputs portions of signals recorded in HDV format during tape playback.
When an i.LINK cable is connected, only signals in HDV format from the
HDV/DV jack will be input/output for recording/playback. Also, select this
setting when the unit is connected via an i.LINK cable to a computer
supporting HDV format (see pages 48, 59).
DV :
Outputs signals of portions recorded in DVCAM/DV format during tape
playback. When an i.LINK cable is connected, only signals in DVCAM/DV
format from the
Also select this setting when the unit is connected via an i.LINK cable to a
computer that supports DV format (see pages 48, 59).
Notes
• Before changing the setting, be sure to disconnect the i.LINK cable, or turn the other device
off. If an i.LINK cable is connected when you change the setting, the video equipment may
not recognize the signals correctly.
• If you select [AUTO], the screen turns off temporarily when HDV signals are switched to
DVCAM/DV signals or vice versa. The video and audio also stops at the same time.
• For details on the i.LINK output and the recording tape format, see pages 100 and 101.
Switches the recording mode between DVCAM and DV format (SP mode only).
BDVCAM :
Records in DVCAM format.
DV SP :
Records in DV format (SP mode).
Note
You cannot change the setting during recording.
HDV/DV jack are input or output for recording/playback.
HDV/DV jack.
HDV/DV jack

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hvr-m35nHvr-m35eHvr-m35p

Table of Contents