Sony HDCP1 Brochure page 2

Sony's 3D Production System
Following the rapid development of three-dimensional (3D) digital technologies, the environmental conditions
and infrastructures required for high-quality 3D content creation are now improving year on year.
Sony has a brilliant lineup of products for 3D shooting, editing, displaying, and more, along with a wide range
of products for enhancing creativity at every stage of production. In other words, Sony provides a complete
solution for the entire 3D production workflow, enabling greater production efficiency and creativity. This
solution has been achieved through extensive, long-term research and meticulous development, and in
response to emerging industry demands.
Sony's solution is effective in a broad range of applications including 3D movie production, and at sporting
events, concerts, and in many other locations.
3D Image Acquisition Solutions
Cameras:
Sony has a broad lineup of products for 3D Imaging Acquisition
Solutions including high-performance POV-type cameras that are
more compact and versatile than regular cameras. All of these
products are provided to enhance the flexibility of 3D shooting.
n HDFA-200 HD Optical Fiber Unit
Users can configure a high performance, compact 3D camera rig
using the HDFA-200 combined with the HDC-P1. Signals can be
transmitted from two cameras to a camera control unit (CCU), using
a single optical fiber cable, and also power and genlock signals can
be supplied to the two cameras. With the HDFA-200, right and left
cameras can be controlled from a single remote control panel (the
RCP-1500, RCP-1501, or RCP-1530).
n HDC-P1 Multi-purpose Camera
With its remarkably compact body, the HDC-P1 full-HD CCD POV-style
camera is an excellent solution for a 3D camera rig.
n HDC-1500R Series Cameras with the HKC-T1500
Adaptor
The lightweight HKC-T1500 Adaptor linked with the HDC-1500R
Series camera is ideal for a 3D rig because of its flexibility.
n HZC-3DRCP Camera Operating Software
HZC-3DRCP software installed in the RCP-1500, RCP-1501, or
RCP-1530 Remote Control Panel enables operators to control a two-
camera 3D system without using an HDFA-200. With this software,
operators can control both right and left cameras simultaneously.
ACQUISITION
3D Camera System with 3D Rig
HKC-T1500
HDFA-200
2
When connecting
HDC-P1 cameras
HDC-P1 (Right camera)
HDFA-200
HDC-P1 (Left camera)
Sample 3D Camera Configuration for 3.7 Gbps Transmission by HDFA-200
HKC-T1500
HKC-T1500
Sample 3D Camera Configuration for 1.5 Gbps transmission
HDC-1500R
HDC-P1
HDVF-EL75
Viewfinder
SDI2 OUT
VF
CAM-SUB (R)
Optical fiber
CAM-MAIN(L) CAM-SUB(R) REMOTE VF
CAM-MAIN(L) CAM-SUB(R) SDI1 OUT SDI2 OUT TEST OUT PROMPTER1/
REMOTE REMOTE
REF OUT SDI IN REF OUT SDI IN GENLOCK IN
cable
CAM-MAIN(L) CAM-SUB(R) AUDIO IN 1 AUDIO IN 2 DC IN DC OUT
DC OUT DC OUT 4A max 3.7 Gbps
AUX CRANE TRACKER RET CTRL DC OUT
0.5A max
MIC MIC
LINE +48V LINE +48V
OFF AES/EBU OFF
CAM-MAIN (L)
INTERCOM
Intercom headset
HDVF-EL75
Intercom headset
Optical fiber cable
1.5 G
HDC-1500R
(Right camera)
HDVF-EL75
Intercom headset
Optical fiber cable
1.5 G
HDC-1500R
(Right camera)
CORRECTION
Stereo Image Processor
MPE-200 with MPES-3D01
software
HDCAM-SR VTR
HDCAM-SR™ Tape
Picture
monitor
HDCU-LD* + HKCU-1005/2005
Camera Control Unit
HD-SDI (R)
HD-SDI (L)
RCP-1500/1501/1530
Remote Control Panel
HDCU-1000
HD-SDI (R)
POE HUB
LAN
LAN
HD-SDI (L)
RCP-1500/1501/1530
HDCU-1000
+ HZC-3DRCP
Left
Right
SRW-5100