Adjusting Tone Volume; Continuous Bake Mode Settings - Electrolux EI30IF40LS Use And Care Manual

Induction range
Hide thumbs Also See for EI30IF40LS:
Table of Contents

Advertisement

18
Changing Oven temperature display (°F or °C)
The oven control is factory preset to display oven temperatures
with Fahrenheit (°F) values. The control may be changed to dis-
play temperatures in Celsius (°C) if desired.
To change the temperature display mode:
1. Press and hold BROIL key for 6 seconds.
Release when F or C appears in display.
2. Press BROIL to toggle between F and C
temperature display choices. When the
desired mode appears in the display
release the key.
3. Press START to accept.
The clock display cannot be modified while oven is active with
any cooking function or during self-clean operation.
Changing between 12- Hour Energy Saving or

continuous bake mode settings

The oven control is factory preset for a 12 HR Energy Saving
mode. This setting automatically turns off any oven function
after 11 hours and 59 minutes of non-stop cooking. The control
may be set to override this feature if there is a need for cooking
beyond 12 hours.
To change between 12 Hour Energy Saving and continuous
bake settings:
1. Press and hold timer on-off for 6 seconds.
Either 12 Hr Off
(Figure
33) will appear.
2. Press timer again to choose desired setting.
3. Press START to accept.
Fig. 32 Oven set for 12 Hr energy saving mode
Fig. 33 Oven set for continuous operation
(Figure
32)or Stay On

Adjusting tone volume

A tone will sound when a key is pressed and also at the end of a
cycle (timer, cook time. or end time). The factory audio setting is
preset to the highest level
adjusted for lower levels from 1 through 5, or can be turned off.
Level Aud 5 is the highest setting, level 1 is the lowest setting
(Figure
35) and Aud OFF
trol setting.
Fig. 34 Tone volume highest level
START
Fig. 35 Tone volume lowest level
Fig. 36 Tone volume off
To adjust the audio tone level
1.
Press and hold End Time for 6 seconds.
When Aud appears release the key.
2.
To choose the different audio level continue
to press End Time to toggle to the desired
audio level and then release the key.
3.
Press START to accept
START
When the control is set for Aud OFF, error tones will remain
audible.
Setting Oven Controls
(Figure
34). The volume may be
(Figure
36) will provide a silent con-
:
end
time
end
time
START

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents