Sony VPL-EW246 Operating Instructions Manual page 7

e Using various functions during
projecting
D ZOOM (Digital Zoom) +/– key
Enlarges a portion of the image while
projecting.
1 Press the D ZOOM + key to display
the digital zoom icon on the projected
image.
2 Press the V/v/B/b keys to move the
digital zoom icon to the point on the
image you want to enlarge.
3 Press the D ZOOM + key or the D
ZOOM – key repeatedly to change the
enlargement ratio. The image can be
enlarged up to 4 times.
Press the RESET key to restore the
previous image.
BLANK key
Cuts off the projected image
temporarily. Press again to restore the
previous image. Picture muting helps
reduce power consumption.
MUTING key (VPL-EW276/EW246/
EW226/EX276/EX246/EX226 only)
Mutes the audio output temporarily.
Press again to restore the previous
volume.
VOLUME +/– key (VPL-EW276/
EW246/EW226/EX276/EX246/
EX226 only)
Adjusts the volume output.
*2
FREEZE key
Pauses a projected image. Press again to
restore the image.
Notes
*1: Use this key when inputting a
computer signal. But it may not be
used depending on the resolution of
the input signal.
*2: Use this key when inputting a
computer signal.You cannot use this
"
key when Type A USB
" "
USB or Network
input.
*1
" "
, Type B
"
is selected as the
f Setting the energy–saving mode
easily
ECO MODE key
Energy-saving mode can be set easily.
Energy-saving mode consists of "Lamp
Mode," "With No Input," "With Static
Signal" and "Standby Mode."
1 Press the ECO MODE key to display
the ECO Mode menu.
ECO Mode
ECO
User
:Sel
2 Press the V/v key or ECO MODE key
to select "ECO" or "User" mode.
ECO: Sets each mode to the optimum
energy-saving value.
Lamp Mode: Low
With No Input: Standby
With Static Signal: Lamp
Dimming
Standby Mode: Low
User: Sets each item of the ECO
Mode menu as you desire (go to
step 3).
3 Select "User" then press the b key.
The setting items appear.
User
Lamp Mode
Auto Power Saving
With No Input
With Static Signal
Standby Mode
:Sel
:Set
4 Press the V/v key to select the item
then press the ENTER key.
5 Press the V/v key to select the setting
value.
6 Press the ENTER key.
The screen returns to the User screen.
For details on ECO Mode settings, see
"Lamp Mode," "With No Input," "With
Static Signal" and "Standby Mode" on
the Connection/Power menu (page 27).
Location and Function of Controls
:Back
RETURN
High
Off
Lamp Dimming
Standard
:Back
RETURN
7