(Continued)
Item
Part number
Interface
For head
Power supply
For motor
For cutter
For logic
Mechanism (cutter)
Dimensions
Interface board
Weight (Mechanism+Cutter)
Mechanism
Expected life
Cutter
Operating temperature
Environmental
Operating humidity
conditions
Storage temperature
Storage humidity
Head temperature
Detection
Paper out/Mark detect
Head-up
Recommended thermal sensitive paper
*1: There may be exceptions.
*2: 24 VDC, minimum head resistance.
*3: Guarantee: +5 C ~+40 C.
Specifications
FTP-632MCL301/302
Centronics (ESC/POS
TM
), RS232C
24 VDC
5%, Voltage
* 2
Current : average
( ): Peak
1.11 (1.45) A (at 80 mm/s printing speed, 25% printing ratio)
0.81 (1.45) A (at 50 mm/s printing speed, 25% printing ratio)
0.75 (0.87) A (at 30 mm/s printing speed, 25% printing ratio)
24 VDC
5%, 1.0 A maximum
24VDC
5%, 1.0 A maximum
5 VDC
5%, 0.5 A maximum
123 (W) 70 (D) 42 (H) mm (w/cutter)
131 (W)
89 (D)
24 (H) mm
approximately 380 g (w/cutter)
8
Pulse durability : 1
10
pulse/dot (using Fujitsu's standard
driving method)
Wear resistance : 50 km (at 25% printing ratio)
5
3
10
cuts
* 3
0 to +50 C
20 to 85% RH (no condensation)
–20 to +60 C (excluding paper)
5 to 95% RH (no condensation)
By thermistor (applied energy control, abnormal temperature detection)
By photointerrupter
By microswitch
For front insertion use (80 mm width)
For rear insertion use (85 mm width)
*Recommended papers
· Oji Paper
· NIPPON Paper
· MITSUBISHI Paper Mills
FTP-632MCL301/302
: FTP-030PU001, FTP-030P0701
: FTP-030P0020, FTP-030P0702
: PD150R, PD160R, PD170R
: TF50KS-E,TF60KS-E,TF60KJ-R
: P220VBB-1, AFP-235
3