Advertisement
(Continued)
Item
Part number
Interface
For head
Power supply
For motor
For cutter
For logic
Dimensions
Mechanism
Interface board
Weight
Expected life
Mechanism
Cutter
Operating temperature
Environmental
conditions
Operating humidity
Storage temperature
Storage humidity
Head temperature
Detection
Paper out/Mark detect
Head-up
Recommended thermal sensitive paper
*1: There may be exceptions.
*2: 24 VDC, minimum head resistance.
*3: Guarantee: +5 C ~+40 C.
FTP-632MCL001/002/303/304
Specifications
FTP-632MCL001/002
Centronics (ESC/POS
TM
), RS232C
24 VDC
5%, Voltage
* 2
Current : average
( ): Peak
1.11 (1.45) A (at 80 mm/s printing speed, 25% printing ratio)
0.81 (1.45) A (at 50 mm/s printing speed, 25% printing ratio)
0.75 (0.87) A (at 30 mm/s printing speed, 25% printing ratio)
24 VDC
5%, 1.0 A maximum
---
5 VDC
5%, 0.5 A maximum
108 (W) 48 (D) 20 (H) mm (Excluding lever)
131 (W)
89 (D)
24 (H) mm
approximately 94 g
8
Pulse durability : 1
10
pulse/dot (using Fujitsu's standard driving
method)
Wear resistance : 50 km (at 25% printing ratio)
---
* 3
0 to +50 C
20 to 85% RH (no condensation)
–20 to +60 C (excluding paper)
5 to 95% RH (no condensation)
By thermistor (applied energy control, abnormal temperature detection)
By photointerrupter
By microswitch
For front insertion use (80 mm width)
For rear insertion use (85 mm width)
*Recommended papers
· Oji Paper
· NIPPON Paper
· MITSUBISHI Paper Mills
FTP-632MCL303/304
24 VDC
5%, 1.0 A maximum
117 (W)
57 (D)
38 (H) mm
approximately 330 g
500,000 cuts
: FTP-030PU001, FTP-030P0701
: FTP-030P0020, FTP-030P0702
: PD150R, PD160R, PD170R
: TF50KS-E,TF60KS-E,TF60KJ-R
: P220VBB-1, AFP-235
3
Advertisement
