Setting - Acer S1213Hne Series User Manual

Setting

The Acer SmartPen can work in place of your regular
computer mouse. Just hold the pen in your hand, and point it
at the projected image to point, click, and drag. It gives you
more flexibility to operate your computer without standing
next to it.
Pen Function
•
Link Channel
•
Moving Key
•
SmartPen
Double Click Speed
•
Pairing
•
Information
•
For more details, see the notes following this table.
Selects a preferred closed captioning mode from CC1, CC2,
CC3, CC4 (CC1 displays captions in the primary language in
Closed Caption your area). Select "Off" to turn off the captioning feature.
This function is only available when a composite video or S-
Video input signal is selected and its system format is NTSC.
The up/down move of your electronic screen relates to power
Auto Screen
on/off of the projector.
Selecting "On" enables the function. The projector can output
a VGA signal when it is in standby mode and the VGA IN (or
VGA IN 1) and VGA OUT sockets are correctly connected to the
VGA OUT
devices.
(Standby)
To use the Acer SmartPen, select "On" to activate this
function.
Set a channel to differentiate between projectors and
communicate with the Acer SmartPen.
To use the moving key, select "Enable" to activate this
function. When it is activated, you can only move the
pointer by long-pressing the wheel button.
Adjust the double click speed of your pen to make it
response faster or slower to meet your needs.
To pair a pen, select "Pairing" and follow the on-screen
instructions. To release a pen, select "Release" and
follow the on-screen instructions.
Displays more information about smart pen such as
battery capability and RF strength.
Enabling this function slightly increases the standby
power consumption.
23