Power Cable; Connecting The Ac Adaptor - Yamaha U3-SILENT Owner's Manual

Connecting the AC Adaptor

■ Upright piano
Note
For some models, the PJP-PS04 AC adaptor is supplied.
1
Connect the AC adaptor to the DC12V jack at the
rear of the piano.
2
Loop the cord through the hook on the piano, as
shown.
3
Connect the AC adaptor to the AC wall outlet.
■ Grand piano
1
Connect the AC adaptor to the DC IN 12V jack at
the rear of the control unit.
2
Connect the power cable to the AC adaptor.
3
Connect the power cable extended from the AC
adaptor to the AC wall outlet.
Warning
Use the Yamaha PA-150A/PJP-PS04 AC adaptor, or an equivalent recommended by Yamaha. Use of other AC adaptors may result
in damage, overheating, or fire.
Caution
• Do not stretch the cord or bend its ends.
• Do not attempt to use the cord if it is stretched or if the ends of the cord have been bent. Attempting to do so may cause
interruptions to the power supply.
• Always turn off the main unit power before disconnecting the AC adaptor.
• When you wish to move the piano, unplug the AC adaptor from the AC outlet and disconnect it from the DC12V or DC IN 12V
jack before proceeding.
• Unplug the AC adaptor from the AC outlet if you do not intend to use the instrument for an extended period of time.
Getting Started
DC12V
jack
1
3
PA-150A
DC IN 12V jack
3
PJP-PS04
2
Chapter
1
2
1
9