Table of Contents
Advertisement
Playback Screen
1 – Submenu
2 – Shuffle
3 – Repeat
4 – Track Number
5 – Battery
6 – Track Length
7 – Progress Meter Displays status of the currently playing track
8 – Play/Pause
9 – Track Name
10 – Album Name
11 – Artist Name
Li-Polymer Battery
The Sansa c200 player comes with a replaceable and rechargeable lithium polymer
battery. Remember to fully charge the battery before using the device for the very
first time. It takes approximately 3.5 hours to fully charge the battery. The
battery can be charged through the USB port of the computer, the car adapter (not
included) USB port, or the USB-AC adapter (not included) port.
Note:
•
Some low-power USB ports may not be able to provide enough charge power.
•
The Li-polymer rechargeable battery may eventually need to be replaced as they
have limited charge cycles.
•
To purchase a replacement battery, visit your local retailer or www.sandisk.com
Charging battery over USB
1) Connect the larger end of the USB cable into the dock connector of the
Sansa player.
2) Connect the smaller end of the USB cable to an available USB port on the
computer.
3) The Sansa c200 display screen will say Connected.
4) To stop recharging, disconnect the cables.
Note: The computer must be on for most USB ports to charge your battery.
Getting Started
Indicates that there is a Submenu available
Indicates when the Shuffle function is enabled
Indicates when the Repeat function is enabled
Displays the current track number and the total number
of tracks
Indicates the battery status
Displays the elapsed time of currently playing track
To play, resume, or pause currently playing track
Displays name of currently playing track
Displays album name of the currently playing track
Displays artist name of the currently playing track
7
Hide quick links:
Advertisement
Table of Contents
