Removing The Display Latch - Dell Precision M4300 Service Manual

1 display panel 2 display panel side bracket
6. Remove the four M2 x 3-mm screws from the left display-panel side bracket and lift away the bracket.
Removing the Display Latch
CAUTION: Before performing the following procedures, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching a connector on the back panel of
the computer.
1. Follow the procedures in Before You
2. Remove the display assembly (see
3. Remove the display bezel (see
4. Remove the display panel (see
5. Remove the four M2 x 3-mm screws from the top display panel bracket and lift away the bracket.
1 screws (4) 2 top display panel bracket
6. Slide the display latch toward the right side of the top cover and straight out.
1 display latch
7. Unhook the latch spring from the display latch, and then lift away the latch.
Begin.
Removing the Display Assembly).
Removing the Display Bezel).
Removing the Display Panel).
2 latch spring
3 screws (4)
3 top cover