Back to Contents Page
1394 Card
Dell™ Latitude™ E6400 and E6400 ATG and
Mobile Workstation Precision™ M2400 Service Manual
Removing the 1394 Card
Replacing the 1394 Card
Removing the 1394 Card
CAUTION:
Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1. Follow the instructions in
Before Working on Your
2. Remove the bottom of the base assembly (see
3. Remove the modular drive (see
4. Remove the hinge covers (see
5. Remove the heatsink assembly (see
6. Remove the display assembly (see
7. Remove the LED cover (see
8. Remove the keyboard (see
9. Remove the right speaker grill (see
10. Remove the palm rest assembly
11. Remove the card cage (see
12. Disconnect the 1394 cable from the system board, and unroute the cable.
13. Remove the two M2 x 3 screws.
14. Lift the 1394 card up at an angle and remove it.
1 1394 cable connector 2 system board
3 M2 x 3 screws (2)
4 1394 card
Computer.
Removing the Bottom of the Base
Removing the Modular
Drive).
Removing the Hinge
Covers).
Removing the Processor Heatsink
Removing the Display Assembly (E6400 and M2400)
Removing the LED
Cover).
Removing the
Keyboard).
Removing the Right Speaker Grill/Fingerprint Reader
(Removing the Palm Rest
Assembly).
Removing the Card
Cage).
Assembly).
Assembly).
or
Removing the Display Assembly (E6400
Assembly).
ATG)).