Replacing The Wireless Mini-Card - Dell Inspiron 17R 5720 Owner's Manual

Replacing the Wireless Mini-Card

Procedure
1 Remove the new Mini-Card from its packaging.
2
Align the notch on the Mini-Card with the tab on the
system-board connector.
CAUTION: Use firm and even pressure to slide the Mini-Card into place.
If you use excessive force, you may damage the connector.
CAUTION: The connectors are keyed to ensure correct insertion.
If you feel resistance, check the connectors on the Mini-Card and on the
system board, and realign the Mini-Card.
CAUTION: To avoid damage to the Mini-Card, never place cables under the
Mini-Card.
3 Insert the Mini-Card connector at a 45-degree angle into the
system-board connector.
4 Press the other end of the Mini-Card down into the slot on the
system board and replace the screw that secures the Mini-Card to the
system-board connector.
5 Connect the antenna cables to the connectors on the Mini-Card.
The following table provides the antenna cable color scheme for the
Mini-Cards supported by your computer.
Connectors on the Mini-Card
WLAN + Bluetooth (2 cables)
Main WLAN + Bluetooth (white triangle)
Auxiliary WLAN + Bluetooth (black
triangle)
WWAN (2 antenna cables)
Main WWAN (white triangle)
Auxiliary WWAN (black triangle)
Postrequisites
1 Replace the base cover. See "Replacing the Base Cover" on page 20.
2 Replace the battery. See "Replacing the Battery" on page 13.
3 Follow the instructions in "After Working Inside Your Computer" on page 11.
Antenna Cable Color
Scheme
white
black
white
black
Wireless Mini-Card
33
|