Anynet; Connecting Anynet + Devices - Samsung LN40B500P3FXZA User Manual

Software Upgrade
Samsung may offer upgrades for TV's ¿ rmware in the future. Please visit Samsung.com or
contact the Samsung call center at 1-800-SAMSUNG (726-7864) to receive information about
downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB
drive to the SERVICE port located on your TV.
N
Insert a USB drive containing the ¿ rmware upgrade into the
the TV.
N
Please be careful to not disconnect the power or remove the USB drive while upgrades
are being applied. The TV will turn off and turn on automatically after completing the
¿ rmware upgrade. Please check the ¿ rmware version after the upgrades are complete.
When software is upgraded, video and audio settings you have made will return to their
default (factory) settings. We recommend you write down your settings so that you can
easily reset them after the upgrade.
HD Connection Guide
This menu presents the connection method that provides the optimal quality for the HD TV.
Refer to this information when connecting external devices to the TV.
Contact Samsung
View this information when your TV does not work properly or when you want to upgrade the software.
You can view the information regarding the call center, product and software ¿ le download method.

ANYNET +

¦

Connecting Anynet + Devices

Anynet + is a function that enables you to control all connected Samsung devices that support Anynet + with your Samsung TV's
remote.
The Anynet + system can be used only with Samsung devices that have the Anynet + feature. To be sure your Samsung device has
this feature, check if there is an Anynet + logo on it.
To connect to a TV
HDMI IN 1(DVI), 2 jack on the TV and the HDMI OUT jack of the corresponding Anynet + device using an HDMI
1. Connect the
cable.
TV
HDMI 1.3 Cable
English - 27
SERVICE port on the side of
Anynet + Device 1
HDMI 1.3 Cable
USB drive
Anynet + Device 2