How to use the multimedia function
Insert USB storage device. Press SOURCE button entering the
SOURCE main menu. Press
and select USB main menu. Press </> repetitively to select main
menu.
The equipment is featured with one USB 2.0 High Speed Host port. It
supports FAT16/FAT32 disk format but not multi-partition disk system.
Each f le folder can hold no more than 2944 each of f les and folders
in total. In addition, each folder is limited to less than 128 each of f les.
Fig. 1 Photo
1. Select "Photo" and press "OK" to display photos (*.jpg format
only) stored in USB.
2. Press </> button to rotate the photo 90° counterclockwise and
clockwise respectively.
3. OK: Press OK to start and to pause for auto display.
4.
: Press
/
respectively.
5. ZOOM: Press ZOOM button to zoom in or out for scales at
150%, 200%, 25%, 50%, and 100% relative to the original size.
You may select ZOOM-PLUS and ZOOMEXTREME for photos
at size around 7M pixels. Press
viewing area, press OK to resume normal viewing.
6. In photo display mode, you may press STOP button for browsing
mode. You can select folders and picture f les for display. Press
"OK" for back to display mode.
7. Press "STOP" button to return to PHOTO menu.
8. Press "BACK" to exit.
/
to select back and next photo for display
/
21
button to select USB. Press </>
/
/</> button to enlarge