Troubleshooting - Fujitsu Stylistic ST5111 User Manual

Troubleshooting

Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the
following table.
Problem
Unavailable Incorrect network
name (SSID) or
network
network key
connection
Poor radio wave
condition
Radio wave
transmission has
stopped
The computer to be
connected is turned
off
Active channel
duplication due to
multiple wireless
LAN networks
No right of access to
the network to be
connected
Incorrectly-
performed network
setting
Unmatched
[Network
authentication
(shared mode)]
settings in Windows
XP
It takes too long to
retrieve the network
and display the
connected
computers.
Possible Cause
Ad hoc connection: verify that the network names (SSID's) and network
keys (WEP) of all computers to be connected have been configured
correctly. SSID's and WEP key values must be identical on each machine.
Access Point (Infrastructure) connection: set the network name (SSID)
and network key to the same values as those of the access point.
Set the Network Authentication value identically to that of the Access
Point. Please consult your network administrator for this value, if
necessary.
Ad hoc connection: Retry connection after shortening the distance to
the destination computer or removing any obstacles for better sight.
Access Point (Infrastructure) connection: Retry connection after short-
ening the distance to the access point or removing any obstacles for
better sight.
Check if the wireless switch is turned ON. Also verify "Disable Radio" is
not checked in "Network setting" window.
Check if the computer to be connected is turned ON.
If there is any other wireless LAN network nearby, change channels to
avoid active channel duplication.
Check if you have a right of access to the network to be connected with.
Check the protocol, work group name or shared setting.
If the setting of [Network authentication (shared mode)] is not matched
with that of access point or computer to be connected with, no commu-
nication can be established. Check the parameter setting.
Retrieve computers as follow:
1. Click [Start] button, then click [Search].
2. Click [Computers or people].
3. Click [Computers on the network].
4. Input the name of computer to be connected with in [Computer
name] and click [Search].
5. Double-click the icon of connected computer.·
W i r e l e s s L A N U s e r ' s G u i d e
Possible Solution
63