Fujitsu Stylistic ST5111 User Manual page 20

S t y l i s t i c S T 5 1 0 0 S e r i e s T a b l e t P C U s e r ' s G u i d e – S e c t i o n O n e
In the following table, a "blinking" LED flashes at the rate of once per second; an LED that is "blinking, slow" flashes at the
rate of one second on, five seconds off.
Icon Mode/State
• On State
Battery
• Idle Mode
• Standby,
without AC
adapter
• Standby with AC
adapter
• Hibernate,
with AC adapter
• Off State
• Hibernate,
without AC
adapter
HDD Access • On State (or
flashing)
• Idle Mode
• Standby
• Hibernate
• Off State
Security • On State
12
LED State
Green, continuous
Amber, continuous
Red, continuous
Red, blinking
Green, blinking slow
Amber, blinking slow
Red, blinking slow
Off
Green
Off
Green, continuous
(until password is
entered)
Table 1-1. System Status Indicators
Remarks
Battery charge is between 50%-100%
Battery charge is between 13%-49%
Battery charge is between 0%-12%
There is a battery error.
Battery charge is between 50%-100%.
Battery charge is between 13%-49%.
Battery charge is between 0%-12%.
Battery is not installed, or system is off or in
Hibernate mode.
If battery is inserted during power off, LED
blinks amber for 4 seconds to detect
battery. Battery status is displayed for 5
seconds after that.
Displayed when hard disk drive is accessed.
Hard disk drive is not being accessed.
The Security Indicator lights (if a password
was set) when the system resumes from
Off or Standby modes. You must enter the
password that was set in the Security Panel
before your system will resume operation.
(See Security Functions of Application Buttons
on page 17 for more information.)