Setup Procedure - Acer K130 Service Manual

6-3 Setup Procedure

1. Setup
- Hold on "Power" key and plug in Power
Adapter to projector. When the power LED
flash blue, release the "Power" button.
- Then the Power LED should flash blue->blue->red
and the menu LED lights Blue.
2. Connect all ports
(1) Connect P1 of fixture to COM Port of
PC/Laptop by RS232 Cable.
(2) Connect P2 of fixture to VGA1 IN
Port of projector by 24P to VGA Cable.
(3) Connect P3 of fixture to DVI
Port of projector by DVI Cable .
(4) Plug Power Adapter to P4 of fixture.
(5) Plug Power Adapter to projector.
Note: - You must confirm that the JP3 is closed in
all procedure.
Adapter
P4
RS232 Cable
P1
JP3
24P to VGA Cable
DVI-HDMI adapter
K130
Confidential
DVI Cable
P3
P2
24P to VGA Cable
DC IN
Cable
6-3