Gigabyte GA-M750SLI-DS4 User Manual page 76

B. Configuring SATA controller mode in BIOS Setup
Make sure to configure the SATA controller mode correctly in system BIOS Setup .
Step 1:
Turn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-Test).
Ensure NV SATA Controller is enabled under Integrated Peripherals. To create RAID, set OnChip
SATA Mode to RAID (Figure 1).
On-Chip IDE Channel
NV SATA Controller
Onchip SATA Mode
Onboard Audio Function
HDMI Audio
On-Chip MAC Lan
Onboard 1394
SMART LAN
Onboard LAN Boot ROM
Onboard Serial Port 1
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
On-Chip USB
USB Memory Type
USB Keyboard Support
USB Mouse Support
Legacy USB storage detect
: Move Enter: Select
F5: Previous Values
Step 2:
Save changes and exit BIOS Setup.
The BIOS Setup menus described in this section may differ from the exact settings for your
motherboard. The actual BIOS Setup menu options you will see shall depend on the motherboard
you have and the BIOS version.
GA-M750SLI-DS4 Motherboard
CMOS Setup Utility-Copyright (C) 1984-2008 Award Software
Integrated Peripherals
+/-/PU/PD: Value
F6: Fail-Safe Defaults
[Enabled]
[Enabled]
[RAID]
[Auto]
[Auto]
[Auto]
[Auto]
[Press Enter]
[Disabled]
[3F8/IRQ4]
[378/IRQ7]
[SPP]
3
[V1.1+V2.0]
[SHADOW]
[Disabled]
[Disabled]
[Enabled]
F10: Save
Figure 1
- 76 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults