Gigabyte GA-EP45T-USB3P User Manual page 11

USB
IEEE 1394
Internal
Connectors
Back Panel
Connectors
w
w
w
I/O
South Bridge:
w
- Up to 12 USB 2.0/1.1 ports
brackets connected to the internal USB headers)
NEC D720200F1 chip:
w
- Up to 2 USB 3.0 ports on the back panel
T.I. TSB43AB23 chip
w
- Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a
bracket connected to the internal IEEE 1394a header)
1 x 24-pin ATX main power connector
w
1 x 8-pin ATX 12V power connector
w
1 x floppy disk drive connector
w
1 x IDE connector
w
8 x SATA 3Gb/s connectors
w
1 x CPU fan header
w
2 x system fan headers
w
1 x power fan header
w
1 x front panel header
w
1 x front panel audio header
w
1 x CD In connector
w
1 x S/PDIF In header
w
1 x S/PDIF Out header
w
2 x USB 2.0/1.1 headers
w
1 x IEEE 1394a header
w
1 x serial port header
w
1 x parallel port header
w
1 x clearing CMOS jumper
w
1 x PS/2 keyboard port
w
1 x PS/2 mouse port
w
1 x coaxial S/PDIF Out connector
1 x optical S/PDIF Out connector
2 x IEEE 1394a ports
6 x USB 2.0/1.1 ports
w
2 x USB 3.0/2.0 ports
w
1 x RJ-45 port
w
6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/
w
Side Speaker Out/Line In/Line Out/Microphone)
iTE IT8718
w
(8 on the back panel, 4 via the USB
(Note 3)
- 11 - Hardware Installation