Gigabyte GA-EP45T-USB3P User Manual page 104

For the GIGABYTE SATA2:
Turn off your computer and replace the failed hard drive with a new one. Use either the GIGABYTE SATA2
RAID BIOS utility or the GIGABYTE RAID CONFIGURER utility in the operating system to perform the re-
build.
• Rebuilding with the GIGABYTE SATA2 RAID BIOS utility
Step 1:
When the message "Press <Ctrl-G> to enter RAID Setup Utility" appears, press <Ctrl> + <G> to enter the util-
ity. In the Main Menu block, select Rebuild Mirror Drive and press <Enter>. The selection bar will move to
the degraded array. Press <Enter> again.
GIGABYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS v1.06.78
[ Main Menu ]
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to Non-RAID
Solve Mirror Conflict
Rebuild Mirror Drive
Save And Exit Setup
Exit Without Saving
[ RAID Disk Drive List ]
Model Name
RDD0: GRAID
[ fg TAB]-Switch Window
Step 2:
The selection bar will then move to new hard drive in the Hard Disk Drive List block. Press <Enter> to start
the RAID rebuilding process. The rebuilding progress is displayed at the bottom of the screen. When done,
the status of the array will display as Normal.
GIGABYTE Technology Corp. PCIE-to-SATAII/IDE RAID Controller BIOS v1.06.78
[ Main Menu ]
Create RAID Disk Drive
Delete RAID Disk Drive
Revert HDD to Non-RAID
Solve Mirror Conflict
Rebuild Mirror Drive
Save And Exit Setup
Exit Without Saving
[ RAID Disk Drive List ]
Model Name
RDD0: GRAID
Rebuilding....35%, please wait....
Appendix
[ Hard Disk Drive List ]
Model Name
HDD0: ST3120026AS
HDD1: ST3120026AS
RAID Level Capacity
1-Mirror 120 GB
[ hi ]-Select RAID
[ Hard Disk Drive List ]
Model Name
HDD0: ST3120026AS
HDD1: ST3120026AS
RAID Level Capacity
1-Mirror 120 GB
- 104 -
Capacity
120 GB
120 GB
Status Members(HDDx)
Degraded 0?
[ENTER]-Action
Capacity
120 GB
120 GB
Status Members(HDDx)
Degraded 0?
Type/Status
RAID Inside
Non-RAID
[ESC]-Exit
Type/Status
RAID Inside
Non-RAID