Table of Contents
Advertisement
Important! The AllShare Cast Hub is a 1-to-1 connection. If a previous
device was paired to the Hub and is still connected to the
AllShare Cast Hub, you can not pair a new device until the
first connection is stopped.
•
I have a new device and the hub is connected but it doesn't show up in my
list:
• Force the hub to disconnect from any previously paired devices:
–
Press and hold the RESET button (on the back of the hub),
for about FOUR seconds until the LED begins to blink RED.
–
Access your new device's AllShare Cast screen and rescan for the existing
hub/dongle.
–
Press the RESET button on the hub for ONE second until the LED turns
BLUE.
–
Tap the entry from your device's AllShare Cast screen and confirm
connection.
AllShare Cast Hub - Streaming Videos
The hub supports streaming of purchased media content that
contains DRM (Digital Rights Management).
Note: You can control the volume level of your playback file being
shown on your TV by using your device's Volume buttons. For
additional volume, use your TV's volume controls.
271
Advertisement
Table of Contents
