Security - LG U8210 User Manual

Username Information provided by Service
Provider.
Password Information provided by Service
Provider.
APN APN name to access network.
Information provided by service
provider.
Traffic Class Choose the Traffic Class from the
list. (Default is "Subscribed")
Req. Max UL Bitrate Choose the Request Maximum
Upload Bitrate from the list. (Default
is "Subscribed")
Req. Max DL Bitrate Choose the Request Maximum
Download Bitrate from the
list.(Default is "Subscribed")
- Press "Done" key to save any configuration changes.

3.4 Security

You can activate a PIN code. When it is activated, a
window asking you to enter the PIN code appears
when you turn on the phone so as to prevent
unauthorized use of the phone.
3.4.1 PIN code request
You can activate a PIN (Personal Identification
Numeric). You can check the current status of
configuration from the status bar.
Item Description
On You have to input the PIN code each time the
mobile phone is turned on.
Off You do not have to input the PIN code when
the mobile phone is turned on.
PIN request and release procedures
1. Select 'PIN request' item from the list, and press
[OK]. Then a window allowing you to select 'On' or
'Off' appears.
- Select 'On/Off' from the list, press [OK], and input the
current PIN code to set the PIN request.If 'PIN
request' is already On/Off, an "Already activated"/
"Already cancelled" message will be displayed.
2. 3 incorrect PIN code entries in the PIN code input
window would invalidate the PIN code. In this case,
you have to input the PUK (PIN Unblock Key) code to
configure the PIN code again.
Settings
43