Removing Expresscards - Fujitsu LifeBook E8420 User Manual

•
I
NSTALLING OR REMOVING AN
PROCESS MAY DAMAGE THE CARD AND
•
D
O NOT INSERT AN
THE CARD AS YOU MAY PERMANENTLY DAMAGE THE CARD
Y
OU MAY BE REQUIRED TO LOG ON AS
G
ROUP TO COMPLETE THIS PROCEDURE
NETWORK POLICY SETTINGS MAY ALSO PREVENT YOU FROM COMPLETING THIS PROCEDURE
See your ExpressCard manual for instructions on the installation of your card. Some cards may require
that your notebook is off while installing them.
To install an ExpressCard, follow these steps:
1
Make sure there is no ExpressCard currently in the slot. If there is, see Removing ExpressCards.
2
If the eject button is extended, press it in until it clicks.
3
Insert your ExpressCard into the slot with the product label facing up. If you are inserting a 34 mm card, be sure
to align it with the left side of the slot when inserting it.
4
Push the card firmly into the slot until it is seated in the connector.

Removing ExpressCards

See your ExpressCard manual for specific instructions on removing your card. Some cards may require
your notebook to be in Sleep Mode or Off during removal.
•
W
INDOWS HAS A SHUTDOWN PROCEDURE FOR
A CARD
TO REMOVE DEVICES USING THE
•
I
F THE DIALOG BOX STATES THAT THE DEVICE CANNOT BE REMOVED
CLOSE ANY OPEN APPLICATIONS AND SHUT DOWN YOUR NOTEBOOK
E
XPRESS
E C
XPRESS ARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON
. (R
EVIEW YOUR OPERATING SYSTEM MANUAL FOR THE CORRECT PROCEDURE
S
AFELY
82 - PC Cards/ExpressCards™
C
ARD DURING YOUR NOTEBOOK
/ .
OR YOUR NOTEBOOK
,
YOUR NOTEBOOK
A
DMINISTRATOR OR A MEMBER OF THE
. I
F YOUR COMPUTER IS CONNECTED TO A NETWORK
E C
XPRESS ARDS THAT MUST BE FOLLOWED BEFORE REMOVING
R H
EMOVE ARDWARE ICON IN THE SYSTEM TRAY
,
YOU MUST SAVE ALL OF YOUR OPEN FILES
.
'
S SHUTDOWN OR BOOTUP
, .
OR BOTH
A '
DMINISTRATOR S
,
.
.) I
T IS GOOD PRACTICE
.
,