Outstanding Issues In Junos Release 10.2 For J-Ex Series Switches; Access Control And Port Security; Bridging, Vlans, And Spanning Trees; Class Of Service - Dell PowerConnect J-8208 Release Note

Outstanding Issues in JUNOS Release 10.2 for J-EX Series Switches

The following are outstanding issues in JUNOS Release 10.2R1 for J-EX Series switches.
The identifier following the description is the tracking number in our bug database.

Access Control and Port Security

Bridging, VLANs, and Spanning Trees

Class of Service

Infrastructure
Interfaces
J-Web Interface
Layer 2 and Layer 3 Protocols
Virtual Chassis
Access Control and Port Security
On J-EX Series switches, when you enable and disable IPv6 on the management
interface ( me0 ), the management information is not displayed in the
command output. [PR/503955]
local-information
On J-EX4200 switches, the LLDP-MED Location ID contains incorrect Type, Length,
and Value (TLV). [PR/521658]
On J-EX4200 switches, deleting a static MAC address entry from the Ethernet switching
table does not change the authentication status for the interface in the 802.1X table
with MAC RADIUS, and the interface remains authenticated. [PR/523919]
On J-EX4200 switches with static MAC bypass of authentication configured, MAC
address learning takes a few minutes after the MAC address table is cleared.
[PR/524044]
On J-EX Series switches, you might experience traffic drops under certain network
conditions, even though the user is authenticated. As a workaround, you may restart
the dot1x-protocol. [PR/524675, 528691
Bridging, VLANs, and Spanning Trees
There might be traffic loss on VLANs learned through MVRP during GRES. After the
GRES, there will not be any traffic loss. [PR/458303]
On J-EX Series switches, in a scaled environment with more than 4000 VLANs, MVRP
advertisements might not be sent intermittently when the VLAN membership is
modified. [PR/475701]
Class of Service
On J-EX4200 switches, the
of transmitted packets and queued packets together under the field
of displaying the values under
If you are configuring an interface as part of an aggregated Ethernet interface and also
configuring CoS on that interface, do not commit both configurations using a single
Outstanding Issues in JUNOS Release 10.2 for J-EX Series Switches
show interface queue command output displays the count
and
Queued Transmitted
show lldp
instead
Queued
fields. [PR/259525]
9