Dell PowerConnect B-RX Getting Started Manual page 21

1 Power supply
FIGURE 11
Installing power supply in a PowerConnect B-RX Series four-slot chassis
5. For the eight-slot and 16-slot chassis, follow these steps while referring to
(depending on your chassis), then continue with
a. Slide the card along the card guide until fully inserted, then push the power supply front panel toward the
back of the chassis. This action causes the power supply connector to latch into the backplane connector.
b. Gently pull the handle on the power supply front panel upward and toward the top of the power supply front
panel. This action locks the power supply in place.
1 Power supply
FIGURE 12
Installing power supply in a PowerConnect B-RX Series eight-slot chassis
PowerConnect B-RX Series Getting Started Guide
53-1001682-03
step 6.
1
1
Figure 12 or Figure 13 on page 22
21