Storing Channels In Memory - Samsung LN22B460 - 21.6" LCD TV User Manual

Turning the TV On and Off
Press the POWERP button on the remote control.
You can also use the POWERP button on the TV.
Viewing the Menus
With the power on, press the MENU button.
1
The main menu appears on the screen.
The menu's left side has icons: Picture, Sound,
Channel, Setup, Input, Support.
Press the or button to select one of the icons.
2
Then press the ENTERE button to access the
icon's sub-menu. Press the EXIT button to exit.
The on-screen menus disappear from the
screen after about one minute.

Storing Channels in Memory

(Automatic Method)
Press the MENU button to display the menu.
1
Press the or button to select "Channel", then
press the ENTERE button.
Press the or button to select "Auto Program",
2
then press the ENTERE button.
Press the or button to select the antenna
3
connection, then press the ENTERE button.
Auto Program
Select the Antenna source to memorize.
Air
Cable
Auto
U Move
Start
Start
Start
E Enter m Skip
English-14
When selecting the Cable TV system: Press the
4
ENTERE button to start the auto program.
Press the , , or to select the correct analog
signal cable system source among "STD", "HRC",
and "IRC". Press the or
then press the ENTERE button. If you have Digital
cable TV, select the cable system signal source for
both Analog and Digital.
Auto Program
Selects the cable system.
Analog STD HRC
Digital
STD HRC
Start
U Move
The TV begins memorizing all available stations.
5
Press the EXIT button to exit.
Auto Program
Auto Program in Progress.
DTV Cable : 12 Cable : 32
Stop
Auto Program
Removing scrambled channel.
DTV Cable : 16 Cable : 45
Stop
After all the available channels are stored, it
starts to remove scrambled channels. The Auto
program menu then reappears.
To Stop the Auto Program Function
Press the MENU button while the Auto Program function is
being executed. You can also press the ENTERE button
to stop the setup.
Checking to see if Channels were Stored in Memory
Press the CH button. Only the channels stored in memory
will be selected (in order).
Selecting the antennas
• Air: "Air" antenna signal.
• Cable: "Cable" antenna signal.
• Auto: "Air" and "Cable" antenna signals.
button to select "Start",
IRC
IRC
E Enter m Skip
Cable 38
50%
E Enter m Skip
DTV Cable 41
77%
E Enter m Skip