Plug & Play Feature - Samsung LN22B460 - 21.6" LCD TV User Manual

¦
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1. Press the POWER P button on the remote control.
N You can also use the POWER P button on the TV.
N
The message Select Language of the OSD. is displayed.
2. Press the or button to select the language, then press the ENTERE button. The
message Select 'Home Use' when installing this TV in your home. is displayed.
3. Press the or button to select Store Demo or Home Use, then press the ENTERE button. The message Select the
Antenna source to memorize. is displayed.
N
We recommend setting the TV to Home Use mode for the best picture in your home environment.
N
Store Demo mode is only intended for use in retail environments. If the unit is accidentally set to Store Demo mode and
you want to return to Home Use (Standard): Press the volume button on the TV. When the volume OSD is displayed,
press and hold the MENU button on the TV for 5 seconds.
4. Press the or button to memorize the channels of the selected connection. Press the ENTERE button to select Start.
N
Air: Air antenna signal. / Cable: Cable antenna signal. / Auto: Air and Cable antenna signals.
N
In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the
button, then press the ENTERE button. If you have Digital cable, select the cable system signal source for both Analog
and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.
5. Press the ENTERE button to select Start. The TV will begin memorizing all of the available channels.
N
To stop the search before it has ¿nished, press the ENTERE button with Stop selected.
N
After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then
reappears. Press the ENTERE button when channel memorization is complete. The message Set the Clock Mode. is
displayed.
6. Press the ENTERE button.
Press the or button to select Auto, then Press the ENTERE button. The message Set to daylight saving time. is
displayed. If you select Manual, Set current date and time is displayed.
7. Press the or button to select Off, On or Auto, then press the ENTERE button.
8. Press the or button to highlight the time zone for your local area. Press the ENTERE button. If you have received a
digital signal, the time will be set automatically. If not, see page 30 to set the clock.
9. The connection method to provide the best quality HD is offered. After con¿rming the method, press the ENTERE button.
10. The message Enjoy your watching. is displayed. When you have ¿nished, press the ENTERE button.
If you want to reset this feature...
1. Press the MENU button to display the menu. Press the
2. Press the ENTERE button again to select Plug & Play.
N
The Plug & Play feature is only available in the TV mode.
or button to select Setup, then press the ENTERE button.
English - 22
Plug & Play
Select Language of the OSD.
Menu Language : English
E
Enter
, , or