Connect To A Printer - TRENDnet TEW-811DRU User Manual

TRENDnet User's Guide
• Accept: Clicking this option will disconnect your computer from the device and
allow the requesting computer to connect to the device.
If the remote computer accepts the request, the local computer will display the message
below. Click Close to close the message.
• Reject: Clicking this option will disregard the request.
If the remote computer rejects the request, the local computer will display the message
below. Click OK to close the message.
© Copyright 2013 TRENDnet. All Rights Reserved.

Connect to a Printer

Note: This function applies to stand-alone USB printers or USB multi-function
printers. It is required that the printer drivers are installed before your
computer is able to print. Please ensure the printer drivers are installed. If the
printer drivers are not installed, please refer to your printer manufacturer
website or documentation on where to download and how to install the printer
drivers. Before installing the printer drivers, connect your computer to the
printer using the USB utility first. Some printers may require that the printer is
directly connected to the computer in order to complete the driver installation.
Once the printer drivers are installed properly on your computer,
1. Select the printer listed in the utility.
2. Click Connect to connect your computer to the printer.
3. Once your computer is connected, you can send print jobs to the printer.
4. After you have finished printing, click Disconnect, to make the printer available to
other computers on your network that use the printer, or, you can use the Auto-
Connect Printer Feature.
TEW-811DRU
51