Static Ip - D-Link DWR-512 User Manual

Section 3 - Configuration
Choose this Internet connection if your ISP assigns you a static IP address. After modifying any settings, click Save Settings to save your
changes.
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS Server:
Secondary DNS
Server:
MTU:
MAC Address:
D-Link DWR-512 User Manual
Enter the IP address assigned to your network connection.
Enter the subnet mask.
Enter the default gateway.
Enter the primary DNS server.
Enter the secondary DNS server.
You may need to change the Maximum Transmission Unit
(MTU) for optimal performance. The default value is 1500.
The default MAC Address is set to the Internet port's
physical interface MAC address on the Broadband
Router. It is not recommended that you change the
default MAC address unless required by your ISP.
You can use the Clone Your PC's MAC Address
button to replace the Internet port's MAC address
with the MAC address of your Ethernet card.

Static IP

14