Table of Contents
Advertisement
Features and Functions
LED Indicators and Audible Alarms
The Unit will alarm to indicate certain events.
Front-Panel
Label
AC Power
Battery Power
Low Battery
Fault
Overload
Replace Battery
NOTE: The audible alarm will not sound after the alarm is muted.
Flashlight
The Unit contains a fully functional, detachable
LED flashlight. The flashlight will automatically
illuminate when the power goes out. This safety
function provides an easy way for you to find the
flashlight while illuminating the area surrounding
the Unit. The LED flashlight may be removed from
the Unit to use as a handheld, portable flashlight.
To remove the LED flashlight from the Unit's
recharging dock, pull the top of the LED flashlight
out and downward until it disengages. When
not in use, return the LED flashlight to the Unit's
recharging dock. The LED flashlight will only
fit one way in the recharging dock: with the
flashlight lens pointing toward the top of the Unit
and the LED flashlight button toward the outside.
The LED flashlight will only recharge if properly
docked on the Unit.
Flashlight Recharging and Battery Replacement
CAUTION:
• The detachable LED flashlight contains 3
NiMH 700mAh AAA batteries. When replacing
batteries, replace with the same number
Visual
Audible Alarm
Indicator
AC Power LED
None
lights
Battery Power
Tone every
LED lights
10 seconds
Low Battery LED
Tone every
flashes
1 second
Fault LED lights
Continuous tone
Overload LED
Tone every
flashes
1 second
Replace Battery
None
LED lights
AC Power
Battery Power
Low Battery
press and hold
Description
The Unit is operating normally on AC power.
The Unit is operating on battery power.
The alarm will stop when main AC power
is returned.
The battery energy is running low. This alarm
will continue until the Unit performs a forced
shutdown when the battery is depleted.
A fault has occurred. Disconnect all
equipment from the Unit prior to checking.
The Unit is overloaded. Remove connected
equipment until fault mode is cleared.
The battery has reached the end of its useful
life. The user must replace the battery as
soon as possible to ensure proper operation
of the Unit.
and type of batteries. Do not attempt to use
alkaline or other non-NiMH battery types
for replacement.
• Risk of energy hazard. Before replacing
batteries, remove conductive jewelry such as
chains, wristwatches, and rings. High energy
through conductive materials could cause
severe burns.
• Do not short-circuit the batteries.
• Carefully install the batteries in the LED
flashlight housing, ensuring proper polarity.
Reverse polarity installation may cause
damage. The battery installation polarity is
labeled on the LED flashlight housing.
• Do not heat or incinerate the battery. The
battery may explode.
• Only use the UPS Unit to recharge the
batteries. Charging under other conditions
can cause the battery to leak, overheat, burst,
and/or catch fire.
• Properly dispose or recycle used batteries.
5 5
Fault
Replace Battery
Overload
Advertisement
Table of Contents
