Table of Contents
Advertisement
Q
When I connect a projector, and change the settings to display the screen
image on both the LCD and the projector by pressing the MENU button, the
screen is not displayed properly.
A Press the MENU button and press the button to the right of the LCD/CRT button to
switch to LCD+CRT Clone.
The screen may not be displayed or only part of the screen may be displayed when
the LCD resolution is too low or too wide and the projector cannot support the
resolution. In this case, right-click over the Desktop, select Personal Settings >
Display Settings (Y), set the resolution to 800 x 600 pixels and then try again.
Q
The shortcut icons are not displayed on the screen even if I press the
shortcut key.
A The shortcut icons only appear when the Easy Display Manager program is
installed.
Q
I have connected a monitor (or projector) to the computer, but the colors on
the monitor are abnormally displayed.
A Check if the monitor and computer are properly connected with the signal cable
and reconnect the cable if necessary.
Q
The picture on the screen trembles.
A The picture on the screen may tremble when you view some Internet pages or play
some on-line games. In this case, using an external monitor is recommended.
201
Advertisement
Table of Contents
