Charging The Battery; Battery Usage Precautions - Huawei MediaPad 10 Link User Manual

mm x 15 mm x 25 mm. Inserting a SIM card with
other dimensions will damage your HUAWEI
MediaPad.
3. Insert the microSD card with its gold contacts facing
up, as indicated in the preceding figure. Push the card
inward until it clicks into place.
4. Replace the card slot cover.
Do not remove the card slot cover from the tablet.
To remove the microSD card when HUAWEI MediaPad is
powered on, access the Home screen, and touch
Storage > Unmount SD card. Then open the microSD card
slot cover and gently push the microSD card. The microSD
card then pops out.

Charging the Battery

1. Connect your charger to the provided USB cable.
2. Connect the charger to a power outlet.
3. Connect your HUAWEI MediaPad to the USB cable to
start charging the battery.
With HUAWEI MediaPad powered on, the battery icon in the
status bar turns

Battery Usage Precautions

> If HUAWEI MediaPad has not been used for a long time
or the battery power is extremely low, you may not be
able to power it on immediately after you begin
charging the battery. This is normal. Allow the battery to
4
when the battery is fully charged.
>