Changing The Font Of Existing Text Segment - Brother BES Lettering Instruction Manual

60 Pacesetter BES Lettering
Instruction Manual
Changing the Font of Existing Text
Segment
You can change the font type of text objects using the drop-
down list of fonts in the Properties Panel. At the top of the area,
you see a preview image showing a sample of the selected font.
You can choose from two types of fonts at the outset; embroi-
dery fonts or TrueType fonts. The default list of fonts you see in
the Text area will be embroidery fonts; to show the TrueType
fonts, check the box next to TTF.
When TrueType fonts are used for embroidery letters, the satin
stitches that comprise them will sew out horizontally.
Note that, depending on the embroidery font you choose, there
are different minimum and maximum height recommendations.
For more information, see "Displaying font properties."
To change a font type:
1 Select the text segment you want to alter.
2 In the Text Properties area, in the TTF field, do one of the
following:
 To choose from the selection of Embroidery fonts, leave
the TTF checkbox unchecked.
 To choose from the selection of TrueType fonts, check
the TTF checkbox.
The list of available fonts will change accordingly.
3 From the Font list, select the font you want to use.