Fujitsu Plasmavision W P42HHS30E User Manual page 7

LOWER PART
①
1 power switch
When pressed while in the "OFF" state, the power indicator lamp lights and the display is placed in the "ON
can be turned "ON" or "OFF" by the remote control or on the control panel of the display. When pressed while in the "ON
the power indicator lamp goes out and the display is placed in the "OFF" state.
2 Display input (picture) terminal
Connect this terminal to the display output terminal on the tuner using the special cable provided.
3 Display input (audio) terminal
Connect this terminal to the display output terminal on the tuner using the special cable provided.
4 External speaker output terminal (EXT SP)
Connect this terminal to the optionally available speaker.
When connecting a cable, attach a ferrite core to the cable. (See P. E-8.)
*See the speaker instruction manual for more information.
5 Power input terminal
Connect this terminal to the power cable supplied with the display.
② ③ ④ ⑤
" state, and the power
" state,
E-7