Table of Contents
Advertisement
6.1
RAID driver installation
After creating the RAID sets for your server system, you are now ready to
install an operating system to the independent hard disk drive or bootable
array. This part provides instructions on how to install the RAID controller
drivers during OS installation.
6.1.1
Creating a RAID driver disk
You may have to use another system to create the RAID driver disk from
the system/motherboard support CD or from the Internet.
A floppy disk with the RAID driver is required when installing Windows
2000 or Red Hat
®
disk drive that is included in a RAID set. You can create a RAID driver disk in
DOS (using the Makedisk application in the support CD).
To create a RAID driver disk in DOS environment:
1.
Place the motherboard support CD in the optical drive.
2.
Restart the computer, then enter the BIOS Setup.
3.
Select the optical drive as the first boot priority to boot from the
support CD. Save your changes, then exit the BIOS Setup.
4.
Restart the computer.
5.
Press any key when prompted to boot from CD.
Loading FreeDOS FAT KERNEL GO!
Press any key to boot from CDROM...
The Makedisk menu appears.
A) FreeDOS command prompt
B) Make ICH7R Matrix Storage for Win32 bit driver disk
C) Make ICH7R Matrix Storage for Win64 bit driver disk
D) Make Intel ICH7R LSI MegaRAID for Windows 32/64 bit Driver Disk
E) Make Intel ICH7R LSI MegaRAID for RHEL3 UP6 32/64 bit Driver Disk
F) Make Intel ICH7R LSI MegaRAID for RHEL4 UP2 32/64 bit Driver Disk
G) Flash AMI BIOS for P5M2-M
H) Flash AMI BIOS for P5M2-M/C
I) Broadcom ASF Firmware Update
Please choose A To I:
6.
Place a blank, high-density floppy disk to the floppy disk drive, then
select the type of RAID driver disk you want to create by typing the
number before the option
7.
Press <Enter>.
8.
Follow screen instructions to create the driver disk.
ASUS P5M2-M Series
Enterprise ver. 3.0/SuSE operating system on a hard
®
6-1
Advertisement
Table of Contents
