Fujitsu Plasmavision PDS5003U User Manual page 26

On Screen Menu screen
Adjustment Menu (See P . E-32–E-33.)
Option
(1) Dot Clock
(for RGB2, RGB3)
(2) Clock Phase
(for RGB2, RGB3)
(3) Vertical Sync
(for RGB2, RGB3)
(4) Clamp Position
(for Comp.video, RGB2, RGB3)
(5)Auto Calibration
(for RGB2, RGB3)
Function Menu(See P . E-32, E-34.)
Option
(1) 24 Frame Mode
(for Video, S-video, Comp.video)
(2) 3D Y/C
(for Video(3.58NTSC))
On Screen Menu(See P . E-32, E-34)
Option
(1) OSD
(2) Language
Input Terminal Menu screen
Function
Adjusts the dot clock.
Adjusts clock phase.
Corrects vertical
synchronization signal.
Adjusts clamp pulse phase.
Selects the optimum
dynamic range of images.
Function
Displays the optimum movie
pictures.
Selects whether to enable
the 3D Y/C circuit.
Function Operation
Selects whether to display Use
information other than
menus.
Selects language used for Display the "Language"
menus. selection screen and use
Others(1/2) Menu screen
Operation
Eliminates blur when the
optimum value is selected with
or .
Eliminates blur when the
optimum value is selected with
or .
Use or to select the
optimum value for eliminating
flicker.
Use or for switching.
Select Execute and use or
to select an option.
Operation
Use or for switching.
Use or for switching.
or for switching.
or
to select a language.
Range/Setting
-60 to +60
Auto/Manual
(Can adjust 1 to 32 for
Manual)
-1 to +1
-8 to +8
Execute
Yes/No
Range/Setting
On (Movie) /
Off (Normal)
On (3D Y/C circuit) /
Off (3-line)
Range/Setting
On (displayed) /
Off (not displayed)
English
Deutsch (German)
Español (Spanish)
Français (French)
Italiano (Italian)
Português (Portuguese)
E-23