SELECTING INPUT MODE
VIDEO INPUT MODE
* You can also use the
switches on the display's
control panel to accomplish
these steps.
RGB INPUT MODE
* You can also use the
switches on the display's
control panel to accomplish
these steps.
Press
to select a desired input
1
mode.
Each time you press
appears. The sequence is as follows:
Video:
Displays pictures from equipment
connected to the Video terminal.
S-video:
Displays pictures from equipment
connected to the S-video terminal.
Comp.video: Displays pictures from equipment
connected to the component video
input terminal.
* When RGB-PC is selected in BNC Input mode,
Comp. video mode can not be input.
(See P.E-35.)
Press
to select a desired input
1
mode.
Each time you press
appears. The sequence is as follows:
RGB1:Displays pictures from equipment
connected to the RGB1 (DVI-D) terminal.
RGB2:Displays pictures from equipment
connected to the RGB2 (mD-sub) terminal.
RGB3:Displays pictures from equipment
connected to the RGB3 (BNC x5) terminal.
* When Comp. video is selected in BNC Input
mode, RGB3 mode can not be input.
(See P. E-35)
, a different input mode
S-video mode
Comp.video mode
, a different input mode
RGB1 mode
RGB2 mode
E-17