External Ports; Lan Connector - Fujitsu Siemens Computers RELIABILITY D1859 Technical Manual

External ports

External ports
1
7
8
1 PS/2 mouse port
2 Parallel port/printer
3 LAN connector (10/100/1000 Mbit/s)
4 USB0 connector

LAN connector

The system board is optionally equipped with the Broadcom BCM5751 LAN controller. This LAN
controller supports the transfer rates 10 Mbit/s, 100 Mbit/s and 1000 Mbit/s. The LAN controller
supports the WOL functionality through Magic Packet
Standard Format).
It is also possible to boot a device without its own boot hard disk via LAN. Here bootix® BootP and
Intel PXE are supported.
The LAN RJ45 connector has two LEDs (light emitting diodes).
LED 1 lights green - a connection exists (e.g. to a hub). LED is blinking green: activity
LED 2 lights green or yellow:
Link Mode: the LAN connection is active.
10 Mbit/s
100 Mbit/s
1000 Mbit/s
8
2
6
1
off
green
yellow
3
5 4
5 VGA port
6 Serial interface COM1
7 USB1 connector
8 PS/2 keyboard board
TM
, Basic Alert-on-LAN II and ASF 2.0 (Alert
2
D1859 (Econel 50)