Fujitsu PRIMEPOWER B23Q8YA-G-02-E Hardware Platform Manual page 39

Operation for solaris 10 operating system
Table of Contents

Advertisement

Limitations and known bugs
No
Recommended actions
Follow these instructions to remove a package. (For example SUNWabc)
1)
Re-install the package to system.
# pkgadd SUNWabc
2)
Find out path name of SMF service manifest in the package.
# grep SUNWabc /var/sadm/install/contents | \
grep /var/svc/manifest | awk '{ print $1 }' | grep xml
/var/svc/manifest/system/abc.xml
3)
Run the following command.
# svccfg -s smf/manifest delpg {$prp_mfst}
$prp_mfst strings must be specified by removing first "/" srting of the manifest path
name with all "/" and "." replaced by "_". Here is an example for
/var/svc/manifest/system/abc.xml at step 2).
4)
Remove package.
# pkgrm SUNWabc
15
"netstat -i" results maybe corrupted when the network interface on the system is
unplumb/plumb by ifconfig(1M), if the system has multiple physical network interfaces.
This problem is solved by the following patch.
119990-01 or later SunOS 5.10: netstat patch
16
Network instance number on Quad Fast Ethernet and Dual Gigabit Ethernet Card might
be assigned randomly to physical network interfaces when the card is installed after OS
installation.
# grep fjqe /etc/path_to_inst
"/pci@81,4000/pci@2/FJSV,pl4b@4" 0 "fjqe"
"/pci@81,4000/pci@2/FJSV,pl4b@5" 3 "fjqe"
"/pci@81,4000/pci@2/FJSV,pl4b@6" 5 "fjqe"
"/pci@81,4000/pci@2/FJSV,pl4b@7" 7 "fjqe"
"/pci@85,4000/pci@2/ethernet@4" 1 "fjqe"
"/pci@85,4000/pci@2/ethernet@5" 2 "fjqe"
"/pci@85,4000/pci@2/ethernet@6" 4 "fjqe"
"/pci@85,4000/pci@2/ethernet@7" 6 "fjqe"
Install the following patch before installation of Quad Ethernet Cards or Quad
GigabitEthernet Cards.
118822-23 or later SunOS 5.10: kernel Patch
17
mpstat(1M) takes an extra interval time at the ending of the command when the
command is executed with interval and count.
This problem is solved by the following patch.
118373-01 or later SunOS 5.10: mpstat Patch
18
pkgadd(1M) -R command might fail when target directory is on a remote NFS server.
This problem is solved by the following patch.
119254-06 or later SunOS 5.10: Install and Patch Utilities Patch
19
The following message might be displayed if during optional driver package installation
the PCI Card is not installed.
chgrp: //dev/{driver_name}: No such file or directory
There is no impact on the system. The driver and required PCI Card work after a system
reboot.
Remarks
Solaris 10
3/05 only
Solaris 10
3/05 only
Solaris 10
3/05 only
Solaris 10
3/05 only
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents