Table of Contents
Advertisement
Limitations and known bugs
No
Recommended actions
Solaris Live Upgrade is not supported with RAID-1(mirror)
12
Custom Jumpstart installation for mirror volumes using a profile that has filesys keyword
of both original and target disk, will fail and the following error message will be shown
at first boot after the installation.
Create a one-way mirror in the profile file. Define a primary submirror Disk as filesys
keyword. Then attach additional submirrors with the finish script to create a two-way
mirror.
1)
2)
13
in.routed might generate a core dump under the following conditions.
1)
2)
3)
Install the following patch.
14
Package remove using pkgrm(1M) might fail if the package provides SMF services and
the package has been removed and installed repeatedly.
32
metattach: host-name: dx: can't attach labeled submirror to an unlabeled mirror
Do not include cylinder 0 of the disks in meta devices.
The disks which constitute a two-way mirror should have the same specification
and configuration. Examples of a profile file and a finish script are shown as
follows:
profile file
# profile keywords
# ----------------
-----------------
:
filesys
filesys
metadb
finish script
#!/bin/sh
:
prtvtoc /dev/rdsk/c0t1d0s2 > /a/c0t1d0.vtoc
fmthard -s /a/c0t1d0.vtoc /dev/rdsk/c0t0d0s2
metadb -a -c 2 c0t0d0s3
metainit d102 1 1 c0t0d0s0
metattach d100 d102
:
No entry of localhost name in /etc/hosts and
No /etc/defaultrouter file and
Reboot system
119712-03 or later SunOS 5.10: usr/sbin/in.routed Patch
## Removing pathnames in class <manifest>
svc:/system/fjsvmadm-evhandsd:default remains enabled; aborting
pkgrm: ERROR: class action script did not complete successfully
profile values
:
c0t1d0s4 0:1 unnamed
mirror:d100 c0t1d0s0 200 /
c0t1d0s3 size 8192 count 2
Remarks
Hide quick links:
Advertisement
Table of Contents
