Advertisement
Back to Contents Page
Using Your Projector: Dell™ 2100MP Projector
Control Panel
Remote Control
On-Screen Display
Control Panel
Power
See
"Powering On/Off the
Projector."
Source
Press
to step through Analog RGB, Composite, Component-I, S-video, and Analog YPbPr sources when multiple sources are connected to the
projector.
Resync
Press
to synchronize the projector to the input source.
Resync will not operate if the
OSD
(On-Screen Display) is displayed.
Menu
Press
to activate the OSD. An input signal is required to activate the OSD. Use the directional keys and Menu button to navigate through the OSD.
Four Directional Keys
The four directional keys
Keystone
Press
or
button to adjust image distortion caused by tilting the projector. (± 16 degrees)
Remote Control
Power
See
"Power On/Off the
Projector."
Source
Press the Source button to choose Analog RGB, Composite, Component-I, S-video, and Analog YPbPr sources.
Resync
Press
to synchronize the projector to the input source.
Resync will not operate if the
OSD
(On-Screen Display) is displayed.
can be used to toggle through the tabs in the OSD.
Advertisement
