Fujitsu MPG3XXXAH-E Product Manual page 125

*9 Off-line data collection capability [16Fh]
Bit
0
1
2
3
4
5 to 7
*10 SMART capability flag [170-171h]
Bit
0
1
2-15
*11 Drive error logging capability [172h]
Bit
0
1 to 15
*12 Quick Test completion time [minutes]
This value indicates the processing time of the Quick Test (off-line mode).
*13 Comprehensive Test completion time [minutes]
This value indicates the processing time of the Comprehensive Test (off-line mode).
*14 Check sum
Twos complement of the lower byte, obtained by adding 511-byte data one by at a time from
the beginning.
5 - 58
If this bit is set to 1, it indicates SMART EXECUTE OFF-LINE
IMMEDIATE subcommand is supported. (FR register = D4)
Vendor unique
If this bit is set to 1, it indicates off-line data collection being
aborted when a new command is received.
If this bit is set to 1, it indicates SMART off-line read scanning is
supported.
If this bit is set to 1, it indicates SMART Self Test is supported.
Reserved bits
If this bit is set to 1, it indicates the attribute data is saved to the
media before the drive enters power save mode.
If this bit is set to 1, it indicates the device saves the attribute
automatically according to fixed operation.
Reserved bits
If this bit is set to 1, it indicates the drive error logging is
supported.
Reserved bits
C141-E116-01EN
Description
Description
Description