Fujitsu MPG3XXXAH-E Product Manual page 124

*7 Off-line data collection status
Values
00h or 80h
01h or 81h
02h or 82h
03h or 83h
04h or 84h
05h or 85h
06h or 86h
40h to 7Fh
C0h to FFh
07h to 3Fh
87h to BFh
If bit [7] is 1, it indicates that automatic off-line data collection function is enabled.
*8 Self Test execution status byte [16Bh]
Bit 0-3: Self Test remain time.
The values in these bits indicate the remaining percentage (0% - 90%) of Self Test until
completion by 0h-9h.
Bit 4-7: Self Test execution status
00h: Self Test has been completed normally. Otherwise Self Test has not
performed.
01h: Self Test has been interrupted by host.
02h: Self Test has been interrupted by the soft/hard reset from the host.
03h: Self Test has been aborted for a final error.
04h: Self Test has been completed abnormally for an unknown meaning.
05h: Self Test has been completed abnormally by Write/Read Test.
06h: Self Test has been completed abnormally by servo analysis.
07h: Self Test has been completed abnormally by Read Scan Test
08h-0Eh:
0Fh: Self Test is being performed.
Off-line data collection is not started.
Reserved
Off-line data collection has been completed without error.
Reserved
Off-line data collection has been suspended by an interrupt
command from the host.
Off-line data collection has been aborted by an interrupt command
from the host.
Off-line data collection has been aborted with a fatal error. (Not
used)
Vendor unique (Not used)
Reserved
Reserved
C141-E116-01EN
Description
5 - 57