Table of Contents
Advertisement
2.2.4. Windows for Workgroups 3.11
Installation
1.
Run INSTALL.EXE in root directory on the
driver disk.
2.
Select Windows for Workgroup in Network
Operating System screen.
3.
If current settings are accepted, select Start
Installation and go to step 13. Otherwise, select
Modify Parameters to make modifications.
4.
Move cursor to the setting you want to make a
change for then press Enter to select a fit value.
When the configuration is accepted, press Enter
on the OK field to exit the screen and go back to
step 3.
5.
Select NDIS Server (LAN Manager,...) as the
network server that you will attach to then press
Enter.
6.
Installation program starts installing drivers and
modifying AUTOEXEC.BAT. Select Yes then
press Enter to modify the files.
7.
Run Windows for Workgroups and click
Network Setup icon in Network group.
8.
In Network Settings dialog box, click
Networks... button to select the network
operating system.
9.
In Networks dialog box, check the radio button
before Install Microsoft Windows Network
and No Additional Network. Press OK to go
back the Network Settings screen.
10. Click Drivers... button to select network driver.
11. From Network Drivers dialog box, press Add
Adapter... button to enter Add Network
Adapter dialog box. Select Unlisted or
Updated Network Adapter and press OK.
12. Windows will prompt a Install Driver dialog
- 10 -
Advertisement
Table of Contents
