Sharp AR M550N - B/W Laser - Copier Installation Manual page 46

: Jan. 9 2004
1
(4) Reattach the control PWB.
1) Reattach the control PWB unit to the main unit.
2) Reconnect the two flat cable connectors that have been removed
in step (2).
3) Secure the unit with the four screws.
4) Return the grips to their original positions.
5) Pull out the grip of the main unit, pass it through the hole shown in
the illustration, then reattach the upper right cabinet that has been
removed in step (2) to the main unit, and secure it with the two
screws.
Reconnect all the cables that have been removed in step (2)-1) to
the control PWB.
Screws
Grip
Upper right cabinet
If another peripheral device must be installed, carry out the following
steps at the end of the installation work.
(5) Turn on the main switches of the main unit.
1) Insert the power plug of the main unit to the outlet.
2) Turn on the main power switch and then close the front cabinet.
3) Turn the main switch located on the right side of the main unit to
the "ON" position.
AR-M550/M620/M700 INSTALLATION MANUAL (AR-FR11) 7 - 2
(6) Make preparations for enabling the data security
function.
To enable the data security function, use the keys on the operation
panel to enter the product key.
For entry of the product key, see the section of key operator programs
of the operation manual for the main unit.
After completing product key entry, turn off the power switch and the
main power switch of the main unit and then turn on the power switch
and the main power switch again.
(7) Make user settings of the data security function.
You can make operation settings of the data security function using a
key operator program.
If some files have been stored using the quick file function before
installation of AR-FR11, be sure to execute [CLEAR ALL MEMORY]
after installation to delete all the stored files.