Jumper Settings - Asus P I-P55TP4N User Manual

Jumper Settings

1. Onboard Multi-I/O Selection (JP4)
You can selectively disable each onboard Multi-I/O item (floppy, serial,
parallel, and IrDA) through BIOS (see page 35) or disable all Multi-I/O
items at once with the following jumper in order to use your own Multi-
I/O card.
Selections
Enable
Disable
2. Flash ROM Boot Block Programming (JP5)
This sets the operation mode of the boot block area of the BIOS Flash
ROM to allow programming in the Enabled position.
Programming
Disabled
Enabled
8
III. INSTALLATION
JP4
[1-2] (Default)
[2-3]
1
2
3
Enable (Default)
Multi I/O Setting (Enable / Disable)
JP5
[1-2] (Default)
[2-3]
1
2
3
Disabled (Default)
Boot Block Programming (Disable / Enable)
P/I-P55TP4N User's Manual
1
2
3
Disabled
1
2
3
Enabled