III. INSTALLATION
Jumpers
1) JP4
2) JP5
3) JP16
4) JP22, 23, 24
5) JP26, 27, 28
6) JP14, 15
7) JP7
8) JP13
Expansion Slots
1) SIMM Slots
2) Cache Expansion
3) CPU ZIF Socket 7
4) ISA Slots 1,2,3
5) PCI Slots 1,2,3
6) PCI 4 / MediaBus
Connectors
1) Keyboard
2) PS/2 Mouse
3) Parallel Port
4) Serial Port
5) Floppy Drive
6) Power Input
7) Primary/Second IDE p. 22 Primary/Secondary IDE connector (40-pin Blocks)
8) JP30 (Fan)
9) Turbo/Power (CON1) p. 23 Turbo LED/Power LED (2-pins)
10) SMI Switch (CON1) p. 23 SMI Switch lead (2-pins)
11) Reset Switch (CON1) p. 23 Reset Switch lead (2-pins)
12) Key Lock (CON1)
13) Speaker (CON1)
14) JP17 (LED)
16) JP31 (IR)
p. 8 Multi-I/O Selection (Enable/Disable)
p. 8 Flash ROM Boot Block Program (Enable/Disable)
p. 9 Total Level 2 Cache Size Setting
p. 9 Voltage Regulator Output Selection
p. 10 CPU External Clock (BUS) Frequency Selection
p. 10 CPU:BUS Frequency Ratio
p. 11 PS/2 Mouse on IRQ12 (Enable/Disable)
p. 11 CMOS RAM (Operation/Clear CMOS Data)
p. 12 DRAM Memory Expansion slots
p. 14 Socket for Pipelined Burst SRAM Cache Module
p. 15 Socket for Central Processing Unit (CPU)
p. 16 16-bit ISA Bus Expansion slots
p. 16 32-bit PCI Bus Expansion slots
p. 18 32-bit PCI Bus Slot and MediaBus
p. 19 Keyboard connector (5-pin Female)
p. 19 PS/2 Mouse connector (6-pin Block)
p. 20 Parallel Port connector (26-pin Block)
p. 20 Serial Port COM1 & COM2 (10-pin Blocks)
p. 21 Floppy Drive connector (34-pin Block)
p. 21 Motherboard Power connector (12-pin Block)
p. 22 CPU 12V Cooling Fan connector
p. 23 Keyboard Lock Switch lead (5-pins)
p. 23 Speaker connector (4-pins)
p. 24 IDE LED activity light
p. 24 Infrared Port Module connector
P/I-P55TP4N User's Manual
5