Asus GRYPHON Z87 User Manual page 110

ASST Fan Profile [Standard]
This item appears only when you enable the Assistant Q-Fan Control feature. It allows
you to set the appropriate performance level of the assistant fan.
[Standard]
[Silent]
[Turbo]
[Fan Off]
[Manual]
The following items appear only when you set the Assistant Fan Profile to [Manual].
Fan Overtime [1 minute]
Allows you to extend the turbo fan's working time for good heat dissipation and lowers the
temperature after system shutdown.
Configuration options: [Disabled] [1 minute] [3 minutes] [5 minutes] [10 minutes]
Anti Surge Support [Enabled]
This item allows you to enable or disable the Anti Surge function for UVP or OVP protection.
Configuration options: [Disabled] [Enabled]
3-42
Set to make the assistant fan adjust automatically depending on the
chassis temperature.
Set to minimize the fan speed for quiet assistant fan operation.
Set to achieve maximum assistant fan speed.
Set to turn off all assistant fans.
Set to assign detailed fan speed control parameters.
ASST Upper Temperature [70]
Use the <+> and <-> keys to adjust the maximum assistant fan duty cycle
and temperature upper limit. The values range from 40ºC to 90ºC.
ASST Fan Max. Duty Cycle(%) [100]
Use the <+> and <-> keys to adjust the maximum assistant fan duty cycle.
The values range from 20% to 100%. When the temperature reaches the
upper limit, the assistant fan will operate at the maximum duty cycle.
ASST Lower Temperature [40]
Displays the lower limit of the temperature.
ASST Fan Min. Duty Cycle(%) [60]
Use the <+> and <-> keys to adjust the minimum assistant fan duty cycle.
The values range from 0% to 100%. When the temperature is under 40ºC,
the assistant fan will operate at the minimum duty cycle.
Allow Fan Stop [Disabled]
Allows your assistant fans to run at 0% duty cycle when the motherboard's
temperature drops to a certain degree.
Configuration options: [Disabled] [Enabled]
Chapter 3: BIOS setup